Guide:Hair Mod File Setup

Welcome to the file setup portion of making a hair mod. For the mesh creation portion, see Modding:Creating Hair Mods.

Tools You'll Need

• BG3 Modders Multitool (required)
• BG3 Mini Tool (optional but helpful)
• Padme's Hair Template (required unless you have a template from somewhere else)
• VSCode or Notepad++ (required)
• UUID Generator Extension in VSCode OR ToolBucket & XML Tools in Notepad++ (found via Plugins > Plugins Admin, then search for it and install.) (optional but helpful)

To generate a UUID in VSCode, just highlight a section of code, right click, and select Generate UUID here. It will replace the selected code with a new UUID.

For the UUID generation in Notepad++, once ToolBucket is installed, you want to press Alt + Shift + G. It will bring up a window as shown below. Keep Include hyphens ticked, and you can also click Don't ask again if you won't use any of the other options. Then click Generate.

If wanting to add more than one hair to your mod, you can use Padme's mini tool linked above for adding new slots to CharacterCreationAppearanceVisuals. You can also use it to edit your .loca file if you desire.

You can choose for your hairs to be autosnapping or non autosnapping.

What are autosnapping and non autosnapping hairs?

Autosnapping hairs are basically when you have an asset you want to work for more than one race/bodyshape/bodytype, but don't want to make a mesh for every single variation. So when setup to be autosnapping, you can apply one mesh to be used by multiple races/bodyshapes/bodytypes. And the game "autosnaps" them into place using a series of "sockets" that the hair is weighted to.

Sometimes you may still need three autosnapping meshes, one for the shorter races, one for the default bodytype and one for the strong bodytype. However we will go through when this is needed further into the tutorial.

Non autosnapping is when the game doesn't snap the hair into place at all. So, you have to create your hair mesh for each race/bodyshape/bodytype that you want it to be usable for. Obviously, this takes more work, but it can often give better/less crunchy results than autosnapping, and it is much easier to manually weight a non-autosnapping hair than an autosnapping hair. For instance, for personal use hairs, you might decide you only want it for one character. Then non autosnapping might be the way to go.

Following the Template

Following Padme's template (or using it as a guide to copy parts from the game files), follow along with this tutorial.

If you are only adding an existing hair from the game to CC without wanting to do any edits, you can remove the Generated folder from your copy of the template and instead just link to the game's existing hair in the _merged.

You may have downloaded the template, and now feel overwhelmed by all the files and folders, but it's really not too complicated. There are only four* files that we need to edit: loca.xml, meta.lsx, _merged.lsf.lsx and CharacterCreationAppearanceVisuals.lsx. You'll also need to place your .GR2 in the Generated folder, but more on that later.

• If using the CharacterCreationSharedVisuals method, technically five files including Races.lsx. More on that later!

Mods/meta.lsx

Remember to create your meta.lsx for your mod as well, as it is required for almost all pak mods. If using multitool to pack, you can create a Mods folder in your workspace folder and let multitool create the meta.lsx for you. Otherwise, follow this tutorial on how to create your meta.lsx: Creating your Meta.lsx

Localization/English/custom_name_here.loca.xml

After you've sorted your meta.lsx, let's start with the loca.xml. This is the file that tells your game what text to display for your hair--aka the name of the hair in Character Creation. If this file is broken or doesn't exist, your hair will show up as "Not Found".

Why is it named .loca.xml? This is because if you package the Main folder (also known as your workspace folder) with multitool, it will auto convert the .loca.xml to .loca. This way, you don't have to manually do the conversions yourself. However, if you prefer to do manual conversions, change the extension to .xml only.

Change custom_name_here to a custom name. It's best to add a personalized prefix beforehand so there is no chance of your mod name clashing with another mod. For example, Padme4000 uses her username, but shortened to P4. So for Padme's viking braid hair, her .loca.xml would be called p4_viking_braid.loca.xml

This way, if someone else happens to make a viking braid, the chances of them also naming their hair "p4_viking_braid" are extremely low, and there's no danger of one of the mods overriding the other.

In this screenshot of a .loca file, the first underscored (yellow) part labeled 1 is a handle. This is technically the same as a UUID except it has no - and instead has 3 extra random digits and adds a h at the beginning. The second underscored (pink) part labelled 2 is where we write what we want the game to show when the handle is active. For example when it comes to character creation mods, it is what shows up in character creation. This should be the name or description of your hair, e.g. "P4 Viking Braid".

Using Multitool to Generate a Handle

The easiest way to obtain a handle is to use multitool to generate a handle for you.

Once you have multitool open, make sure to check the box next to Handle. Then you can click Generate for the tool to generate a new handle. Clicking on the box that has the handle inside will copy it to your clipboard so you can go to your file and paste it in.

(Optional) Using mini tool to create/edit the .loca

If you don't want to edit the .loca manually, you can use Padme's mini tool to do it for you! So currently you have to open the localization editor via the CharacterCreationAppearanceVisuals buttons, and find the open localization button in there. For the next update it will be on the main page due to many types of mods needing it.

This is what it looks like once open:

So first we see a Folder Path setup, if you haven't already create the folders for the .loca file. Though while we are editing it the extension is .xml

If you want to use the tool to create your folders create a folder called Mods in the same folder as the tools exe. And put your mod folder in here. Now for the first box in the editor fill in the exact name your workspace folder has, then you can check mod folders to see if it can see them and if you don't have them click Create folders. it will create the missing folders.

For Name Handle you want to first click Generate Unique Handle and once it has one click the Update button. Remember always click the update button. And always check your files once done just in case the tool didn't work for whatever reason or you forgot to press update. As you don't want clashing uuids/handles.

For Display Name you want to write what you want the user to read when your asset is active. It's display name in game. For example in character creation it is the name your asset has when hovering over it. Once you have done that click the Update button.

If you don't yet have a localization file use the Save as button

If you already have one setup first use the Locate your localization.xml, the box above will fill in with that path. Then click Add to your mod file to add the new handle to your mod.

Congrats you have finished setting up/using the mini tool to edit/create your localization file.

Just remember before packing to convert the xml to .loca with lslib or if using multitool to pack your mod name the file .loca.xml for multitool to auto convert for you.

Hair _merged.lsf

Next, let's look at _merged.lsf.lsx. What is this? It's the file where we tell the game where to locate our mesh in our mod, as well as other information it might need.

Why is it called _merged.lsf.lsx? Similar to the .loca file, the multitool will automatically convert our _merged to .lsf file format, which it needs in order to be read by the game. Of course, you can name it _merged.lsx if you want to convert it manually.

You can find the _merged file at: Public\Autosnapping_Template\Content\Assets\Characters\[PAK]_Hair\_merged.lsf.lsx.

Here's an example _merged file:

       <region id="VisualBank">
       <node id="VisualBank">
           <children>
               <node id="Resource">
                   <attribute id="AttachBone" type="FixedString" value="" />
                   <attribute id="AttachmentSkeletonResource" type="FixedString" value="" />
                   <attribute id="BlueprintInstanceResourceID" type="FixedString" value="" />
                   <attribute id="BoundsMax" type="fvec3" value="0.1584038 1.846514 0.167948" />
                   <attribute id="BoundsMin" type="fvec3" value="-0.1540881 1.345605 -0.09591679" /> 
                   <attribute id="ClothColliderResourceID" type="FixedString" value="" />
                   <attribute id="HairPresetResourceId" type="FixedString" value="" />
                   <attribute id="HairType" type="uint8" value="0" />
                   <attribute id="ID" type="FixedString" value="955faf79-1707-4ea9-87f4-39a5fba49120" />
                   <attribute id="MaterialType" type="uint8" value="0" />
                   <attribute id="Name" type="LSString" value="AT_Hair01" />
                   <attribute id="NeedsSkeletonRemap" type="bool" value="True" />
                   <attribute id="RemapperSlotId" type="FixedString" value="" />
                   <attribute id="ScalpMaterialId" type="FixedString" value="55534266-4ce2-39d1-d2dd-04a8ec90e841" />
                   <attribute id="SkeletonResource" type="FixedString" value="78d8b5f0-726c-232f-a357-3d05c4b3b859" />
                   <attribute id="SkeletonSlot" type="FixedString" value="" />
                   <attribute id="Slot" type="FixedString" value="Hair" />
                   <attribute id="SoftbodyResourceID" type="FixedString" value="" />
                   <attribute id="SourceFile" type="LSString" value="Generated/Public/Autosnapping_Template/[PAK]_Autosnapping_Template/AT_Test.GR2" /> 
                   <attribute id="SupportsVertexColorMask" type="bool" value="False" />
                   <attribute id="Template" type="FixedString" value="Generated/Public/Autosnapping_Template/[PAK]_Autosnapping_Template/AT_Test.Dummy_Root.0" /> 
                   <attribute id="_OriginalFileVersion_" type="int64" value="144537400540921856" />
                   <children>
                       <node id="AnimationWaterfall">
                           <attribute id="Object" type="FixedString" value="" />
                       </node>
                       <node id="Base">
                           <children>
                               <node id="Tags">
                                   <attribute id="Object" type="FixedString" value="Hair" />
                               </node>
                           </children>
                       </node>
                       <node id="ClothProxyMapping" />
                       <node id="Objects">
                           <attribute id="LOD" type="uint8" value="0" />
                           <attribute id="MaterialID" type="FixedString" value="89b063ff-7bf3-44a8-7e7d-41b29d0dd469" />
                           <attribute id="ObjectID" type="FixedString" value="AT_Test.AT_Test_Mesh.0" />
                       </node>

Let's go through the lines we want to change. Alternatively, you can copy this whole section from the hair you used as a base/edit for your hair. Most hairs can be found in the file below, however if you can't find it there please use index search of multitool.

Vanilla hairs _merged when unpacked with Multitool. Multitool\UnpackedData\Shared\Public\Shared\Content\Assets\Characters\[PAK]_Hair

If you copied that whole section from the hair you used, you can probably skip a few steps here, but we will still go through them. If a line is skipped, this means you can keep that at the vanilla value and you don't need to change anything.

                   <attribute id="BoundsMax" type="fvec3" value="0.1584038 1.846514 0.167948" />
                   <attribute id="BoundsMin" type="fvec3" value="-0.1540881 1.345605 -0.09591679" /> 

These lines you want to match the hair you used as a base, especially if you haven't changed the base race it uses.

                   <attribute id="ID" type="FixedString" value="955faf79-1707-4ea9-87f4-39a5fba49120" />

You want this line to have a unique UUID. Either use the Multitool to generate a new uuid, or use an extension/plugin for your code editing program.

                   <attribute id="Name" type="LSString" value="AT_Hair01" />

You can give this any name you want in the value section. This is just an internal name. For sanity's sake, it might be best to name this after your loca.xml.

                   <attribute id="NeedsSkeletonRemap" type="bool" value="True" />

This line is what tells the game whether the hair is autosnapping or not.

• True = Autosnapping
• False = Non Autosnapping

                   <attribute id="ScalpMaterialId" type="FixedString" value="55534266-4ce2-39d1-d2dd-04a8ec90e841" />

This line determines the scalp material your hair uses. It's basically what your hair would look like if it was cut extremely short. It's often best to use the one your base hair used, but feel free to play around to find the right one. (as of 24.11.23 some hairs in the game files don't have a scalp ID, larian is aware of this bug) You can use this spreadsheet to find the scalp IDs of most vanilla hairs: https://docs.google.com/spreadsheets/d/16cQUxQ7FrGVmIPy5929qae4cCQls4ZWuBX_w08zvv5M/edit

                   <attribute id="SkeletonResource" type="FixedString" value="78d8b5f0-726c-232f-a357-3d05c4b3b859" />

SkeletonResource is normally blank in the game files. However, if a hair uses physics, it will have a SkeletonResource. You can borrow the physics from a vanilla hair using this. (However if making an autosnapping hair, assigning the skeleton id from the skeleton your hair uses in this line will allow you to skip the conform to original gr2 in lslib, which is normally needed if having more than two parts to your hair mesh.)

                   <attribute id="SourceFile" type="LSString" value="Generated/Public/Autosnapping_Template/[PAK]_Autosnapping_Template/AT_Test.GR2" /> 

This is the path to your hair .GR2 in your mod folders.

• Make sure to use / and not \. Windows will automatically insert \ when copying the file path, so be careful.
• Always start the path from your Generated folder.
• Double check that your mesh's extension in the folder is .GR2 and not .gr2. It will not work if the file extension is lowercase.

                   <attribute id="Template" type="FixedString" value="Generated/Public/Autosnapping_Template/[PAK]_Autosnapping_Template/AT_Test.Dummy_Root.0" /> 

This path is almost the same as above, so feel free to copy and paste your path from before to this line.

• Do not remove .Dummy_Root.0 from the line.
• This line does not need .GR2 at the end. You are linking to the Dummy_Root in the .GR2.

                       <node id="AnimationWaterfall">
                           <attribute id="Object" type="FixedString" value="" />
                       </node>
                       <node id="Base">
                           <children>
                               <node id="Tags">
                                   <attribute id="Object" type="FixedString" value="Hair" />
                               </node>
                           </children>
                       </node>

This section is another section where you want to be copying from one of the hairs you used to make the hair.

                       <node id="Objects">
                           <attribute id="LOD" type="uint8" value="0" />
                           <attribute id="MaterialID" type="FixedString" value="89b063ff-7bf3-44a8-7e7d-41b29d0dd469" />
                           <attribute id="ObjectID" type="FixedString" value="AT_Test.AT_Test_Mesh.0" />
                       </node>

This section defines the material for the parts that make up our mesh in the GR2. So if you have 3 mesh parts, you want 3 of these sections.

                           <attribute id="MaterialID" type="FixedString" value="89b063ff-7bf3-44a8-7e7d-41b29d0dd469" />

This defines the MaterialID, or the texture of your hair (straight, wavy, curly, etc). Usually you want the same material as the hair you used for that part. If the different parts are using the same materials, you can keep this the same for each new section you make. See https://bg3.wiki/wiki/Modding:Hair_Meshes for a list of all vanilla hair MaterialIDs.

When making a new section, make sure to also update "_Mesh.0" by increasing the number by 1.

For example:

                       <node id="Objects">
                           <attribute id="LOD" type="uint8" value="0" />
                           <attribute id="MaterialID" type="FixedString" value="89b063ff-7bf3-44a8-7e7d-41b29d0dd469" />
                           <attribute id="ObjectID" type="FixedString" value="AT_Test.AT_Test_Mesh.0" />
                       </node>
                       <node id="Objects">
                           <attribute id="LOD" type="uint8" value="0" />
                           <attribute id="MaterialID" type="FixedString" value="89b063ff-7bf3-44a8-7e7d-41b29d0dd469" />
                           <attribute id="ObjectID" type="FixedString" value="AT_Test.AT_Test_Mesh.1" />
                       </node>

In Blender, when you assigned the export order here:

Where this says 1, that in our merged is that first block so .0

• .0 = Export Order 1
• .1 = Export Order 2
• .2 = Export Order 3

and so on.

If you want to set up a custom texture for your hair, see Creating hair merged.lsf with custom texture

Congrats, we have finished setting up this file!

Character Creation Folder

Full Release Hair Template/Public/Hair_Template/CharacterCreation is the file path for the template's CharacterCreation Shared/Appearance Visuals .lsx files.

For yours it would be your ModName/Public/YourShared/CharacterCreation.

For autosnapping hairs, we can use either CharacterCreationSharedVisuals.lsx or CharacterCreationAppearanceVisuals.lsx. For non autosnapping, use only CharacterCreationAppearanceVisuals.lsx.

You can use Padme's mini tool to help create the CharacterCreationAppearanceVisuals.lsx file, as well as its slots. Or, alternatively, use the file in this template to do it manually.

Why would we want to use CharacterCreationAppearanceVisuals (CCAV) vs CharacterCreationSharedVisuals (CCSV)? Well, CCSV is a lot easier to set up, file-wise. However, it is incompatible with other mods that edit the same files. Unless you plan on using Compatibility Framework, we recommend sticking with CCAV for both types of hair.

Important note: CharacterCreationAppearanceVisuals and CharacterCreationSharedVisuals should be .lsx format, not .lsf or .lsf.lsx format. If you use .lsf.lsx format, the multitool will convert to .lsf and then the game will not know how to read them.

CharacterCreationAppearanceVisuals

       <node id="CharacterCreationAppearanceVisual">
         <attribute id="BodyShape" type="uint8" value="0" />
         <attribute id="BodyType" type="uint8" value="1" />
         <attribute id="DisplayName" type="TranslatedString" handle="haf43c4eb5660459ba047936caa9977a9" version="1" />
         <attribute id="RaceUUID" type="guid" value="0eb594cb-8820-4be6-a58d-8be7a1a98fba" />
         <attribute id="SlotName" type="FixedString" value="Hair" />
         <attribute id="UUID" type="guid" value="d6663db9-f572-4f81-b9a2-fcac96149abe" />
         <attribute id="VisualResource" type="guid" value="d1f51daa-5fc0-446e-92d0-318c187d2ece" />
       </node>

okay let's break this down into sections:

         <attribute id="BodyShape" type="uint8" value="0" />

• 0 = Standard
• 1 = Tall Muscular
• for Half-Orcs even though they use Tall Muscular bodyshape this value needs to be 0

         <attribute id="BodyType" type="uint8" value="1" />

This line defines whether it is for the masc or fem body assets.

• 0 = Masc
• 1 = Fem

         <attribute id="RaceUUID" type="guid" value="0eb594cb-8820-4be6-a58d-8be7a1a98fba" />

The template is currently set up for the race uuid being Human. You will find the other Race UUID's at the bottom of this file on my template or alternatively you can check them [UUID|here]

         <attribute id="SlotName" type="FixedString" value="Hair" />

This tells the game you are adding the asset to a hair slot in character creation.

         <attribute id="UUID" type="guid" value="d6663db9-f572-4f81-b9a2-fcac96149abe" />

This must be a unique uuid

         <attribute id="VisualResource" type="guid" value="d1f51daa-5fc0-446e-92d0-318c187d2ece" />

Match the ID line in the Hairs merged file that we created

Using Minitool to create your CharacterCreationAppearanceVisuals

If you use my mini tool you can auto create these slots with it. By opening up the tool and going to CharacterCreationAppearanceVisuals button.

Once open it will look like this:

SO first what you want to do is if you haven't already create your folders. If you haven't this tool does allow you to create the folders which it will then create in the tools directory into a folder called Mods.

If you get stuck wondering anything at any time feel free to click the ? buttons for more information. But once ready with your folders you can choose the Bodyshape your asset is being made for.

• Default = the default shape the race uses. In this instance Dragonborn and Half Orcs use default not other.
• Other = the other shape they use such as the strong bodyshape

Bodytype whether you want the asset for the Masc or Feminine body type.

Next up is the Handle. click Generate Unique Handle or copy in the handle you made in your localisation file. Alternatively if you haven't already setup your localisation file you can use the open Localisation editor. Once ready click the button that says Update.

Always press update once you are finished with a section.

RaceUUID - this is the id that defines the race that asset is used for. Click on the drop down menu to get options like below:

This list by default is only the vanilla races. The last option is the stand in example for adding custom race uuids to the list so you can use it from this part of the tool. If you add any by following the nect header section it will update when you click the list again. Sometimes may need a double click.

Choose the race you want to use from the dropdown and then click update.

Our next drop down menu is for the Slotname:

You might need to click twice for the whole list to show. For ours we want to choose Hair. Then click update. But the rest of that list is what else can get added via CCAV. Feel free to add custom ones to the list as well if you have managed to add any custom ones, or any I may have forgotten from the list.

Next up is Unique UUID, for this we first want to click Generate Unique UUID and then click update.

VisualResource if you haven't already you can generate an id for use in your merged file here. but if you have already setup your merged file copy over the uuid we used for the ID line here and then click update.

We have now setup the file, so next if we don't have an already existing CharacterCreationAppearanceVisuals file we use Save as button. Navigate to the ModName/Public/YourShared/CharacterCreation folder and save your file.

If you already have a file use the locate your CharacterCreationAppearanceVisuals.lsx button and navitagte to your file. Once setup the bottom box will change to your path. Now you can click Add to your mod file if you want to add new slots to an already existing file.

Congrats you have made your CharacterCreationAppearanceVisuals with the mini tool.

Adding modded races to the Minitool CCAV option

If wanting to use the one slot creation of the mini tool you can add custom races to the Races.txt found in the LSX Files folder that comes with the tool. It uses the files in this folder for the tool. So you might want to backup this folder before editing just in case of any mistakes.

When you open the Races.txt you will be met with this:

RaceUUID so you can quickly replace the above with your desired race
	Drow: 4f5d1434-5175-4fa9-b7dc-ab24fba37929
	Dwarf: 0ab2874d-cfdc-405e-8a97-d37bfbb23c52
	Elf: 6c038dcb-7eb5-431d-84f8-cecfaf1c0c5a
	Githyanki: bdf9b779-002c-4077-b377-8ea7c1faa795
	Gnome: f1b3f884-4029-4f0f-b158-1f9fe0ae5a0d
	HalfElf/Drow: 45f4ac10-3c89-4fb2-b37d-f973bb9110c0
	Halfling: 78cd3bcc-1c43-4a2a-aa80-c34322c16a04
	Human: 0eb594cb-8820-4be6-a58d-8be7a1a98fba
	Tiefling: b6dccbed-30f3-424b-a181-c4540cf38197
	Dragonborn: 9c61a74a-20df-4119-89c5-d996956b6c66
	Half-Orc: 5c39a726-71c8-4748-ba8d-f768b3c11a91
	
Modded Races
	Race Name: 00000000-0000-0000-0000-000000000000
	
To add a new race to the list add them like above. Name of the race and then colon and the RaceUUID

The top lines you might recognise as the uuids from the bottom of the CharacterCreationAppearanceVisuals in my template. This is because the way I set it up is it reads first the name and anything that follows after the : should be the race uuid.

So to add custom races you can add them under Modded Races, you can add them to the top list as well as I just separated them for ease of use.

So you would follow the same format and type the name you want to show up in the dropdown menu and followed straight by a : and then space and then the UUID for your/that custom race.

Minitool 32 CCAV Entries all at Once option

So if making a hair for all races and you would prefer using the CCAV file you can use the 32 CCAV Entries all at Once option to add them all at once to the 32 entries needed to add them to vanilla races that use hairs. So all minus Dragonborn.

When that is open it looks like this:

SO first what you want to do is click Generate Unique Handle or copy in the handle you made in your localisation file and once in click the button that says Update.

Always press update once you are finished with a section.

You will notice this is missing a few things from the CharacterCreationAppearanceVisuals part of the tool. That is because it is already setup for all the races. So we don't need that dropdown menu here.

In the Name section add the name for your asset, this will add a comment to your file so you can better find it when needing to. Press update when your name for your asset is filled in.

Slotname works just like the other file.

You might need to click twice for the whole list to show. For ours we want to choose Hair. Then click update. But the rest of that list is what else can get added via CCAV. Feel free to add custom ones to the list as well if you have managed to add any custom ones, or any I may have forgotten from the list.

VisualResource in your assets merged copy over the uuid we used for the ID line here and then click update.

Next click Generate Unique UUIDs this will change every instance of the UniqueUUID line to a unique uuid for each slot. No repeats.

We have now setup the file, so next if we don't have an already existing CharacterCreationAppearanceVisuals file we use Save as button. Navigate to the ModName/Public/YourShared/CharacterCreation folder and save your file.

If you already have a file use the locate your CharacterCreationAppearanceVisuals.lsx button and navitagte to your file. Once setup the bottom box will change to your path. Now you can click Add to your mod file if you want to add new slots to an already existing file.

Congrats you have made your CharacterCreationAppearanceVisuals with the mini tool for all 32 vanilla slots.

Adding modded races to the Minitool 32 CCAV Entries all at Once option

If you want to add custom/modded races to the 32 slot option, it is possible all you need to do is go to the LSX Files folder included with the tool (make sure to make a backup folder just in case) and edit CharacterCreationAppearanceVisuals_ForAll.lsx

In here you will find comments such as and then race specific comments. I do this for organistation of the file. it does nothing in the game.

Copy any of the entries so for example:

       <node id="CharacterCreationAppearanceVisual">
         <attribute id="BodyShape" type="uint8" value="0" />
         <attribute id="BodyType" type="uint8" value="0" />
         <attribute id="DisplayName" type="TranslatedString" handle="h70718c5dg76b9g402cgbe76ge5b2d9abaa1f" version="1" />
         <attribute id="RaceUUID" type="guid" value="b6dccbed-30f3-424b-a181-c4540cf38197" />
         <attribute id="SlotName" type="FixedString" value="Hair" />
         <attribute id="UUID" type="guid" value="259cf9c6-c6f1-4265-b4b8-dd45f2a3772f" />
         <attribute id="VisualResource" type="guid" value="00000000-0000-0000-0000-000000000000" />
       </node>

Once copied we want to change the RaceUUID line to the UUID of the custom/modded race.

         <attribute id="BodyType" type="uint8" value="1" />

Copy again the whole piece and then for the fem form if the race has one as this is currently set up for masc, change the Bodytype from 0 to 1 for fem.

         <attribute id="BodyShape" type="uint8" value="1" />

copy again if the race has a strong bodyshape and change bodyshape value from 0 to 1. If the default shape is the strong shape then leave it at 0.

And that is all that needs changing. Nothing in my code needs changing so you don't need to worry abuot that, copy these sections as much as you need. And then use the tool as normal and it will edit the 32 vanilla entries plus all the modded entries you added.

CharacterCreationSharedVisuals

Remember that you need your hair to be autosnapping to work properly in this section.

               <node id="CharacterCreationSharedVisual">
                   <attribute id="DisplayName" type="TranslatedString" handle="h163f3e2e9f634634a5e41553265771e4" version="1" />
                   <attribute id="SlotName" type="FixedString" value="Hair"/>
                   <attribute id="UUID" type="guid" value="3ae3e4fc-e792-473a-8853-43520dfc1147"/>
                   <attribute id="VisualResource" type="guid" value="fa926de0-feae-4218-806e-3d037b9d83d3"/>
               </node>

So what is the above? well it's the section we need for each hair asset we make. So let's break down each line.

                   <attribute id="DisplayName" type="TranslatedString" handle="h163f3e2e9f634634a5e41553265771e4" version="1" />

Remember in the localisation part of the tutorial? When we created a handle and entered a name for it? Well this is the line where we want to copy that handle to.

                   <attribute id="SlotName" type="FixedString" value="Hair"/>

If making a Beard you can change this value from Hair to Beard otherwise keep it the same.

                   <attribute id="UUID" type="guid" value="3ae3e4fc-e792-473a-8853-43520dfc1147"/>

You want this uuid to be unique. We will be copying it to our Races.lsx soon

                   <attribute id="VisualResource" type="guid" value="fa926de0-feae-4218-806e-3d037b9d83d3"/>

So the new UUID we made for our ID line in our merged? This is where you want to copy that uuid to as well.

Congrats this file is now ready. Copy and paste the section if you want to make more than one hair and follow the same principles.

Races.lsx

So this file is what we need to edit alongside CharacterCreationSharedVisuals in order for our hair to appear as a slot in character creation. When made via this your hair will appear at the bottom of the hairs in character creation.

However this file is sadly incompatible with other mods editing the same sections we need to edit.

This can be resolved either by opting into my Patches for Races.lsx mod or by using the Compatibility Framework instead of the Races.lsx file.

This files sections can get quite big, and while incompatible with other mods can still be in your mod for users only using your mod that might not be using Script Extender or Compatibility Framework. Or when Script extender needs updating after a new patch releases. So I will still go through how to setup this file:

I won't copy the whole section as that would make this part the longest part of the tutorial

               <node id="Race">
                   <attribute id="Description" type="TranslatedString" handle="he3427d53gdd4ag4901g8683g21844f537c8f" version="5"/>
                   <attribute id="DisplayName" type="TranslatedString" handle="h2e43ea54ga31bg467bg8364g327659ea1986" version="1"/>
                   <attribute id="Name" type="FixedString" value="Humanoid"/>
                   <attribute id="UUID" type="guid" value="899d275e-9893-490a-9cd5-be856794929f"/>
                   <children>

So usually the section will start with something like this. This being the commonly used section for Humanoid. Humanoid will add whatever you add to all races including modded races if they are using the humanoid id as their parent.

If copying from the vanilla races.lsx please remember to copy all the lines, do not remove any unless you mean to remove that particular line from the race. Add your entry to the bottom of those nodes.

In my template you can scroll till you reach:

                       Modded Entries Start
                       <node id="Visuals">
                           <attribute id="Object" type="guid" value="449e617f-8356-46e5-b740-9e4b18200441"/>
                       </node>

Modded Entries start being the comment I added.

                       <node id="Visuals">
                           <attribute id="Object" type="guid" value="449e617f-8356-46e5-b740-9e4b18200441"/>
                       </node>

These are the lines we want to add for each new entry. The uuid here is what we want to match to the unique UUID we gave in the CharacterCreationSharedVisuals UUID line:

                   <attribute id="UUID" type="guid" value="449e617f-8356-46e5-b740-9e4b18200441"/>

This one from the our sharedvisuals file. When you've finished adding the entries you want to add the races.lsx is ready to go.

You can use the Compatibility Framework to avoid issues with your mod clashing with other mods: Modding:Compatibility Framework